Quartz stone Mesa and other table contrast:
Quartz countertops, a new technology made from small gorgeous stone, the manufacturing process is connected to a set of most advanced and patented system production. The product is wrapped in more than 90% natural quartz or granite stone and then mixed with a super high-performance resin and special pigments combined. The use of quartz stone made of the table panel in the guarantee of high hardness, high temperature, acid and alkali resistance, impact, easy to clean on the basis of no harmful to the human body of radioactive elements. Quartz stone plate usually contains the highest natural quartz up to 93%, also contains resins, mineral pigments and other additives, selected materials by color and vacuum high-pressure formation of a very close complex, and then through the complex slitting and surface polishing process to become quartz stone, the surface of the plate as hard as granite, color like marble rich
, the structure of the same as Glass anti-corrosion anti-fouling, finishing the shape of the same as man-made stone perfect. Its main material is quartz, quartz stone without radiation, high hardness, created a quartz stone table scraping not to spend, dirty not dyed, hot not bad, use not old, non-toxic without radiation.
Quartz stone Table Color diversity, Gobi series, Crystal Series, Granite series, Flash Star series more features, can be widely used in public buildings and home decoration field, is a no radioactive pollution, reusable environmental protection, green new building interior decoration materials. Artificial stone is unsaturated polyester resin as the binder, by the marble powder stone sand or granite fragments with adhesive bonding. Common stone, also known as man-made marble. There are two kinds of production methods: press-chip and block-type production, both of which have advantages and disadvantages. The former in the diagonal and flatness, and the latter in the color uniformity of the better also can do special-shaped processing, such as cylindrical processing.
The market for the stone to block the type of production more. Product characteristics: ① Stone Most of the use of different colors of organic pigments, organic pigments on the sunshine, water vapor, acid-base and so did not tolerate, easy to fade or even discoloration. ② Stone Most of the glue content is high, on the one hand lead to stone texture is not strong, decoration effect is not grade, on the other hand the glue expansion and contraction amplitude, the product is easy to deformation, the service life is short, moreover, its glue generally contains volatile poisonous gas, harmful to human body. ③ Stone due to technological reasons, a lot of gas, product impact resistance is poor, but also easy infiltration of sewage infiltration, resistance to disease ability, its gloss is more false, easy to wear, not lasting. ④ with marble powder as raw material of the Hillock stone does not acid, because the main ingredient is CACO3,CACO3 and acid easy reaction and decomposition, marble powder and binder hardness is very low, so the hardness is also very low, generally less than 3 mo hardness, so not wear-resistant, not resistant to engraved, easy to scrape flowers.
⑤ the first generation of granite because of the composition of marble and granites, more or less a certain degree of radioactivity. Artificial stone mainly used in the interior wall, the ground, in the use of physical properties less than natural stone and quartz stone, when used on the ground easily produce drums, discoloration, scratches and other phenomena, long time after the use of cleaning is extremely difficult. There is a big gap between the surface gloss and natural stone.