Marble Water-jet Medallion Processing
Marble waterjet medallion is a common products in the building materials industry. However, many people do not know how to make medallion product. When a gorgeous and beautiful patchwork is presented to the people, it will be passed through in many ways during the production process. 1, the design department confirmed that the color map was consistent with the customer, and then passed the color map and CAD line diagram to the computer drawing room for computer production. Computer graphics include: 1. Layering (separate layer is to separate materials of different colors) 2. Typesetting (regularly arrange the scattered components according to the size of the actual material) 3. Process 4. Compile 5. Audit 6. There are many details in the six major parts of the exploded drawings. For example, there are water jets in the processing section, connecting the components, and saving the “DXF” file format. After completing the computer graphics to waterjet cutting, waterjet cutting is a high-tech water jet cutting technology that can cut a variety of hard materials of different materials, such as stone, ceramics, steel, wood, insulation board and so on. The cutter follows the computer drawing and enters the file path. After the automatic processing by the water jet knife, all the objects displayed on the drawing can be cut out. After the cutting is completed to the mosaic process, the mosaic is a completely handmade process. The bottom edge of the cut out components must be smoothed and polished before the spelling to make it easy to place the spelling. The spelling must be tested according to the computer drawings, which is the jigsaw typesetting. After the spelling is completed, it is pasted with AB glue. In order to make the surface of the figure flat, the surface of the figure when pasting is on the glass table surface, and the iron piece is used for pressure fixing.
After the spelling of the stone mosaic is completed, it is fixed with a resin. After the resin is dried, it is placed on a thicker machine to set the thickness, complement the color, and then polished and trimmed.
Ground stone mosaic, the surface is a flat effect; the wall, there are flat and convex effect, when the concave and convex effect in the paste, there is a layered, raised part of the mosaic height, the surface and then sealant Then it is clean. Finally to the packaging process.
Before the stone mosaics are assembled, they must undergo a rigorous quality inspection, including the overall dimensions, surface smoothness, cleanliness, alignment of the seams, chromatic aberration lines, etc., and the combined quality requirements can be packaged. Because the stone mosaic is a fragile product, so the packaging requirements are also very high. We must use transparent oil paper to wrap the surface of the product, pre-imitation scratch, and then use the foam edge to avoid damage, and finally use a wooden frame to fix the packaging, labeling, The entire production process is completed.